Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : How to remove the door panel of the Kia Picanto

Kia Picanto - Video tutorial

Model: Kia Picanto MK 1, 2A - Years 2004-2011
Part: Door panel
Operation: How to remove the door panel of the Kia Picanto

Initially you have to remove all the screws that are around the panel, then you have to remove the one that is hidden behind the handle and also the one behind the armrest, the latter two are not difficult to find since there are no caps to protect them. After checking if you have removed all the screws around the panel, proceed with the removal of the panel by simply starting to pull it away from the lower part without forcing the extraction from the upper part, in fact you will have to insert your hand from the lower part just raised and disconnect the connectors of the window controls and remove the handle by disconnecting the cable that controls it and also remove the triangle corresponding to the rear-view mirror. Now you just have to continue to extract the panel.


Posted on 20 September 2023 by ScegliAuto



Removing the rear door panel Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) In this video tutorial we will see how to remove the rear door panel on a first series Kia Picanto, following these simple steps. First of all we ope
How to remove the driver's side door panel on Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) How to remove the driver's side door panel on Kia Picanto? Let's see together in this video how to proceed: before starting the disassembly work, let
How to replace the side mirror on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Before we can start, we will have to go and open the front door of our Kia Picanto. So let's start by disengaging and removing the internal cover pla

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos