Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a KIA Rio

Model: Kia Rio YB, MK 4, SC - Years 2016-2023
Part:

This tutorial shows how to reset the tyre warning light on a KIA Rio, a very simple and quick operation that should be done only after restoring the correct pressure in each tyre as per the manual instructions. First, enter the cabin, then start the engine and locate the button with the warning light icon on the right side of the dashboard near the driver. Press and hold the button for about 3 seconds, or until the warning light disappears completely.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the tire pressure sensor of the Kia Rio?
How do you replace the tire pressure sensor of the Kia Rio?
Kia Rio (2011-2017 / UB, MK 3) To reset the tire pressure warning light on the Kia Rio, you need to inflate the tires until they reach the recommended pressure value: this value is…
TPMS reset on Kia Rio
TPMS reset on Kia Rio
Kia Rio (2011-2017 / UB, MK 3) Thanks to this very short video tutorial today we can see how to reset the TPMS light, which indicates tire pressure, on a Kia Rio, third series mode…
How to Set Up the Tyre Pressure Monitoring System on a Kia Rio
How to Set Up the Tyre Pressure Monitoring System on a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) To set up the tyre pressure monitoring system on a Kia Rio, you need to follow a precise procedure. First, inflate the tyres to the recommended press…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos