Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear tail light of the Kia Sportage?

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Tail light

In order to remove the rear light of the Kia Sportage, you need to open the rear hatch so that the black trim panel next to the corresponding light is visible. Once this panel is removed, you will be able to locate the two screws underneath that secure it to its housing. By unscrewing these screws, you will be able to remove the light assembly from its seat, disconnecting the connectors at the back. By doing this, you will be able to install the new light assembly, connecting and securing it inside its housing.

Posted on 2 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light and Bulbs of the Kia Sportage
How to Remove the Rear Light and Bulbs of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today, we will look at the guide and main instructions that will allow you to remove and replace the rear light and all its bulbs of the Kia Sportage…
How to Remove the Rear Headlight Bulb on a Kia Sportage
How to Remove the Rear Headlight Bulb on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Before starting, open the tailgate of your Kia Sportage. Begin by unscrewing and removing the screws that secure the rear light to its housing. Next,…
Replacing the Rear Headlight Bulbs on a Kia Sportage
Replacing the Rear Headlight Bulbs on a Kia Sportage
Kia Sportage (2021-2026 / MK 5, NQ5) Next, we will discover how to remove the rear light and replace its bulbs on a Kia Sportage. First, open the boot lid and start by removing the side …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos