Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlight Bulbs on a Kia Sportage

Model: Kia Sportage MK 5, NQ5 - Years 2021-2026
Part: Tail light bulb

Next, we will discover how to remove the rear light and replace its bulbs on a Kia Sportage. First, open the boot lid and start by removing the side plastic cover of the light; then unscrew the fixing screws located underneath, as illustrated in the video. At this point, remove the rear light and disconnect the bulb connectors, replacing any faulty stop bulbs with new ones (of the same fitting); finally, refit the rear light and test the stop lights.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on a Kia Sportage
How to Replace the Headlight Bulbs on a Kia Sportage
Kia Sportage (2004-2010 / MK 2, KM) Damaged bulbs in the front headlight of a Kia Sportage? Let's see how to proceed with the disassembly in the instructional video. Open the bonnet of …
Replacing Front Headlight Bulb on a Kia Sportage
Replacing Front Headlight Bulb on a Kia Sportage
Kia Sportage (2010-2016 / SL, MK 3) Are the front headlight bulbs blown? Here’s how to remove them on the Sportage. Open the front bonnet by pulling the lever located at the bottom of t…
How to Remove the Rear Light and Bulbs of the Kia Sportage
How to Remove the Rear Light and Bulbs of the Kia Sportage
Kia Sportage (2016-2022 / QL, MK 4) Today, we will look at the guide and main instructions that will allow you to remove and replace the rear light and all its bulbs of the Kia Sportage…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos