Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

TPMS reset on Kia Rio

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: Tire pressure warning light

Thanks to this very short video tutorial today we can see how to reset the TPMS light, which indicates tire pressure, on a Kia Rio, third series model produced from 2011 to 2017. So, the light indicates that one or more tires are deflated, or do not have the correct pressure, so to reset the light it will be sufficient to check and bring all the tires of the vehicle to the correct pressure, in this way the TPMS light will disappear automatically. If the light does not disappear, it is necessary to check with a diagnostic tool the malfunction of one or more pressure sensors.

Posted on 20 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tyre pressure warning light on the Kia Rio
Resetting the tyre pressure warning light on the Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) Below are the instructions to reset the tyre pressure monitoring system (TPMS) warning light on the Kia Rio; before performing the reset, ensure that…
How to reset the TPMS of the Kia RIO
How to reset the TPMS of the Kia RIO
Kia Rio (2016-2023 / YB, MK 4, SC) These short and simple instructions will show us how to reset the tire pressure warning light of the Kia RIO; before resetting the TPMS sensors, it i…
How to reset the tire pressure warning light on the Kia RIO
How to reset the tire pressure warning light on the Kia RIO
Kia Rio (2016-2023 / YB, MK 4, SC) Today we will see the procedure to reset the tire pressure warning light of the Kia RIO; before performing the reset of the TPMS sensors, it is neces…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos