Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light (TPMS) on the Kia Rio

Model: Kia Rio - Years 2017-2023
Part: Tire pressure warning light

In this video tutorial, learn how to reset the tyre pressure warning light on the Kia Rio; before performing the reset operation, ensure all four tyres are at the correct operating pressure. Then, get in the vehicle and start the engine; now press and hold the TPMS reset button located on the left-hand switch panel (driver's side). At this point, you will see the warning light on the dashboard reset; perform this operation when replacing, for example, a flat tyre.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Kia Rio
Resetting the Tyre Pressure Warning Light on the Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) In this guide, learn how to reset the tyre pressure warning light on the Kia Rio. Before performing the reset operation, ensure that all four tyres a…
Resetting the tyre pressure warning light on the Kia Rio
Resetting the tyre pressure warning light on the Kia Rio
Kia Rio (2016-2023 / YB, MK 4, SC) Below are the instructions to reset the tyre pressure monitoring system (TPMS) warning light on the Kia Rio; before performing the reset, ensure that…
How to Set Up the Tyre Pressure Monitoring System on a Kia Rio
How to Set Up the Tyre Pressure Monitoring System on a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) To set up the tyre pressure monitoring system on a Kia Rio, you need to follow a precise procedure. First, inflate the tyres to the recommended press…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos