Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the TPMS of the Kia RIO

Model: Kia Rio YB, MK 4, SC - Years 2016-2023
Part:

These short and simple instructions will show us how to reset the tire pressure warning light of the Kia RIO; before resetting the TPMS sensors, it is necessary that all four tires are at the correct pressure. So, let's get into the car and start the ignition; press and hold the reset button located on the driver's side dashboard until the TPMS light on the instrument panel is reset. Finally, turn off the ignition and start the engine, verifying the successful reset of the tire pressure warning light!

Posted on 17 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Kia Rio (2016-2023 / YB, MK 4, SC) Below are the instructions to reset the tyre pressure monitoring system (TPMS) warning light on the Kia Rio; before performing the reset, ensure that…
Kia Rio (2016-2023 / YB, MK 4, SC) Today we will see the procedure to reset the tire pressure warning light of the Kia RIO; before performing the reset of the TPMS sensors, it is neces…
Kia Rio (2016-2023 / YB, MK 4, SC) In this guide, learn how to reset the tyre pressure warning light on the Kia Rio. Before performing the reset operation, ensure that all four tyres a…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos