Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Duke 390
Part: Clutch

To replace the clutch on the KTM Duke 390, you need to loosen the screws that secure the clutch cover, located on the right side of the bike at the lower central part. Once the clutch discs have been removed from their housing, you can extract them after loosening the fastening screws. Once the old clutch has been removed, you can insert the new clutch discs and secure them with the screws; after installation, you will need to cover everything with the cover and check its operation.

Posted on 25 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Duke 390 To replace the clutch on a KTM Duke 390, loosen the screws securing the cover containing the clutch, located on the right side of the bike, near the …
Duke 390 To replace the KTM Duke 390, you will need to loosen the screws that secure the clutch protection cover, located on the right side of the vehicle in …
Duke 390 In this tutorial, you will learn how to remove and replace the brake and clutch levers on a KTM Duke 390 by following these simple steps. First, remo…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos