|
Do it yourself
| |||
| ||||
Model: Ktm Duke 390
To replace the KTM Duke 390, you will need to loosen the screws that secure the clutch protection cover, located on the right side of the vehicle in the central lower part. Once the cover is removed, you can proceed by loosening the screws that secure the clutch discs in order to extract them from their housing. At this point, you can then install the new replacement clutch discs, and cover everything with the cover; after the replacement, you will need to verify that everything is functioning correctly.
Posted on 12 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Duke 390
To replace the clutch on a KTM Duke 390, loosen the screws securing the cover containing the clutch, located on the right side of the bike, near the …
Duke 390
To replace the clutch on the KTM Duke 390, you need to loosen the screws that secure the clutch cover, located on the right side of the bike at the l…
Duke 390
In this tutorial, you will learn how to remove and replace the brake and clutch levers on a KTM Duke 390 by following these simple steps. First, remo…
|
How to Reset the Oil Light on a Honda PCX 160
In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.088
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
