Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm 1090
Part: Air filter

Remove the original engine air filter on a KTM 1090. Follow this guide to proceed with the replacement. Position the motorcycle on a centre stand. Remove the seat from the motorcycle; unscrew the securing screws at the front of the fuel tank and lift it. Using a screwdriver, unscrew the securing screws of the container, lift off the cap and remove the air filter. If damaged, place a new one or reposition the same filter after cleaning it (use an air compressor). Finally, close the air filter container, reposition the fuel tank, and refit the seat.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

1090 To replace the air filter on the KTM 1090 R Adventure, loosen the bolts on the side panels located at the front of the bike, near the fuel tank. Once…

How to Replace the Fuel Pump on the Yamaha Majesty 400

To replace the fuel pump on the Yamaha Majesty 400, you need to loosen the screws that secure the fuel tank to its housing: once this has been removed and disconnected from hoses and connectors, you will be able to locate the fuel pump underneath. The pump can be removed from its housing by unscrewing the screws that secure it in place, allowing you to slide it out and replace it with a new one: after inserting the new pump, you can then check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos