Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a KTM 1090 R Adventure?

Model: Ktm 1090
Part: Air filter

Video tutorial

To replace the air filter on the KTM 1090 R Adventure, loosen the bolts on the side panels located at the front of the bike, near the fuel tank. Once the side panels are loosened, you can unscrew the screws and disconnect the hoses connected to the fuel tank, completely removing it. After the tank is removed, open the filter box underneath and extract the filter inside.

Once this is removed, insert a new one, reassembling all the removed parts.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Removing the Air Filter on a KTM 1090
Removing the Air Filter on a KTM 1090
1090 Remove the original engine air filter on a KTM 1090. Follow this guide to proceed with the replacement. Position the motorcycle on a centre stand. Re…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos