Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fuel Tank from a KTM 1190 Adventure

Model: Ktm Adventure 1190
Part:

Video tutorial

In this video, we will see the instructions to remove the fuel tank from the KTM 1190 Adventure in simple steps. First, remove the seat from your bike; then unscrew all the fastening screws for the side plastic fairings, as shown in the video.

At this point, also remove the plastic cover of the tank and unscrew the fastening screws using an Allen key; now lift it for removal, disconnecting the fuel hose and the electrical connector for the fuel level sensor!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Adventure 1190 In this guide, we will look at the main instructions for removing and replacing the fuel tank on the KTM Adventure 1190 motorcycle. First, place your…
Adventure 1190 To replace the coolant in the KTM Adventure 1190, loosen the drain plug located at the bottom front of the bike. Once the plug is unscrewed, collect …
Adventure 1190 This brief guide explains how to drain and replace the coolant in the KTM Adventure 1190, as well as the 1290. First, place the bike on its centre st…

How to Replace the Gear Oil of the Piaggio Vespa PX 125

To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos