|
Do it yourself
| |||
| ||||
|
Model: Ktm Adventure 1190
This brief guide explains how to drain and replace the coolant in the KTM Adventure 1190, as well as the 1290. First, place the bike on its centre stand and start by unscrewing the bleed screw found on the water pump, draining the liquid into a container; then unscrew and remove the radiator cap, as shown in the video. At this point, pour in the new coolant, the correct type for your radiator, filling to the level, following the video tutorial to the end!
Updated on 7 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Adventure 1190
To replace the coolant in the KTM Adventure 1190, loosen the drain plug located at the bottom front of the bike. Once the plug is unscrewed, collect …
Adventure 1190
To replace the battery in the KTM Adventure 1190, you need to loosen the screws securing the seat so that it can be removed, giving access to the com…
Adventure 1190
Today's guide will illustrate the steps to remove and replace the front brake pads of the KTM Adventure 1190 enduro bike. First, place your bike on t…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
