|
Do it yourself
| |||
| ||||
|
Model: Ktm Adventure 990
Below are the steps to remove and replace the rear brake pads on a Ktm Adventure 990 motorcycle, following the instructions provided. First, place the central stand and begin by removing the locking pin of the brake pads found on the rear caliper; then clean the pin and caliper of any residual dirt, as shown in the video. Now install the new original brake pads, securing them properly with the pins; check the wear of the brake disc and replace it if necessary.
Updated on 17 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Adventure 990
In today's tutorial, you will learn how to remove and replace the front brake pads on the KTM Adventure 990 motorcycle in simple steps. First, unscre…
Adventure 990
In this brief guide, discover the main steps to remove and replace the clutch on the KTM Adventure 990 motorcycle. First, place the bike on a stand a…
Adventure 990
In this tutorial, see how to replace the air filter in the KTM Adventure 990, a very simple and quick operation. First, insert the key into the left …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |