|
Do it yourself
| |||
| ||||
Model: Ktm Duke 200
In this new mini guide dedicated to your KTM Duke 200, you will discover how to manually reset the service light that appears on the bike's display. First, place the bike on its stand and turn on the ignition. Then, press the "Mode" button located on the left side of the display several times to view the total kilometres travelled. At this point, press the "Set" button until the display shows the "Service" message. Finally, hold down the "Set" button until the reset of the light is complete.
Updated on 30 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Duke 200
To reset the Service light on the KTM Duke 200, connect a diagnostic tool to the vehicle's OBD port: this is located under the seat of the motorcycle…
Duke 200
In this tutorial, you will see how to reset the service on a KTM Duke 200, a very simple and quick operation. Before proceeding, ensure that all requ…
Duke 200
To reset the Service light on a KTM Duke 200, turn on the ignition by turning the key in the ignition switch. Once the dashboard is lit, navigate thr…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
