Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ktm
    3. :
  3. Duke 200
    4. : How to replace the battery in the KTM Duke 200?

Model: Ktm Duke 200
Part: Battery
How to replace the battery in the KTM Duke 200?

In this tutorial, we can see how to replace the battery in the KTM Duke 200, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then open the passenger seat, locate the two indicated bolts, and unscrew them using a 10mm key. Then remove the driver's seat, unscrew the bolt of the battery fixing bracket, and proceed to disconnect both terminals, starting with the negative one. At this point, we can remove the battery from its housing, place the replacement, and follow the reverse procedure.


Posted on 14 January 2024 by ScegliAuto

How to change the motor oil of a Harley Davidson Shovelhead?

To change the oil of a Harley Davidson Shovelhead, start by warming up the engine for a few minutes to make the oil more fluid and facilitate drainage. Park the motorcycle on a flat and stable surface and turn off the engine. Place a container for collecting the oil under the drain plug of the crankcase. Use a wrench to loosen the drain plug and let the old oil drain completely. Once the oil has drained, clean the drain plug and washer, then put the plug back in place and tighten it carefully. Remove the oil tank cap and use a funnel to slowly pour the new oil into the tank, making sure to use the type and quantity specified in the owner's manual. After adding the oil, replace the oil tank cap and start the engine for a few minutes to circulate the new oil. Turn off the engine and check the oil level, adding more if necessary. Check for any leaks around the drain plug before resuming riding.

Watch the video!


by ScegliAuto

More videos