Do it yourself
Frequently asked questions about cars and motorcycles

Model: Ktm Duke 125
Part: Fuel filter

Below are the steps that will allow you to remove and replace the fuel filter and air filter on the KTM Duke 125 motorcycle. First, place your motorcycle on the stand and start removing the rider's seat; then unscrew the screws of the air filter box cover to remove and replace the cartridge with the new one, as shown in the video. Next, unscrew the fixing screws of the fuel tank, disconnecting and removing the fuel filter; replace it with the new one and finally refit the fuel tank!

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Duke 125 You can replace the air filter on the KTM Duke 125 by loosening the screws that secure the seat of the motorcycle to its housing, allowing you to lif…
Duke 125 In today's tutorial, you will learn how to replace the engine spark plug on the KTM Duke 125, as well as the Duke 390. First, remove the fuel tank by…
Duke 125 This guide illustrates how to perform the routine maintenance service by replacing the engine oil and oil filter on the Ktm Duke 125 motorcycle. Firs…

How to reset the oil change light on a Suzuki Burgman 650

Reset the service light on a Suzuki Burgman 650 after completing the required services: First, turn on the ignition. Then, press the button on the left of the instrument panel four times until the mileage until the next service appears. Hold it down for a couple of seconds. On the right side of the instrument panel, there is another button. Press this for a couple of seconds, and the oil light will start to flash. Use the left button to gradually decrease the mileage until you reach the distance at which you want to change the oil again. The YouTuber sets it to 3,000 miles. To confirm, press and hold the left button, and the reset is complete.

Watch the video!


by ScegliAuto

More videos