Do it yourself
Frequently asked questions about cars and motorcycles

How to Set the Time on a KTM Duke 250?

Model: Ktm Duke 250
Part: Clock

Video tutorial

In this tutorial, you will see how to set the time on a KTM Duke 250, a very simple and quick operation to perform, for example, after replacing the battery or when switching to daylight saving time. First, turn on the instrument cluster; it is not necessary to start the engine.

Then, press and hold the two buttons on the left side of the display until the clock starts flashing. Once this is done, adjust the hour using the "Mode" button, change the minutes with the "SET" button, and save the setting by pressing both buttons again.


Updated on 12 September 2026 by ScegliAuto


Related tutorials

Duke 250 .. In this tutorial, you will see how to set the time on a KTM Duke 250, a very simple and quick operation, to be done for example after.. …
Duke 250 In this tutorial, we will see how to reset the service on the KTM Duke 250, a very simple and quick operation, to be performed only after completing …
Duke 250 In this tutorial, we will see how to replace the battery in a KTM Duke 250, a very simple and quick operation. First, ensure that the instrument clus…

How to Replace the Brake Fluid on a Peugeot Citystar 125?

To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump the brake lever, expelling all the old brake fluid from the braking system. Once the fluid has been expelled, disconnect the tube and close the brake caliper again; then, you can loosen the screws that secure the small cap next to the brake lever. Here, you can add the necessary amount of brake fluid, closing the cap afterwards.

Watch the video!


by ScegliAuto

More videos