Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in a KTM 390 Adventure?

Model: Ktm 390 Adventure
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the KTM 390 Adventure, a very simple and quick operation to perform every 12 months or 5,000 miles. First, ensure the engine is completely cold, then remove the lower cover and position a container beneath the bike.

Next, unscrew the drain bolt with an 18 mm spanner, allowing all the oil in the system to drain out, and remove the secondary filter, which should be cleaned of any dirt residue. Finally, open the main filter cap, insert the replacement, reassemble everything, and pour in the new oil through the designated hole.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

390 Adventure In this tutorial, we will see how to change the engine oil on a KTM 390 Adventure R, a very simple and quick operation. First, ensure that the engine…
390 Adventure In this tutorial, we will see how to replace the engine oil in the KTM 390 Adventure, a very simple and quick operation. First of all, let's make sur…
390 Adventure To reset the service light on a KTM 390 Adventure, turn on the ignition by inserting the key into the ignition switch. Once the dashboard is illumina…

How to replace the air filter on the Aprilia Tuareg 660?

To replace the air filter on the Aprilia Tuareg 660, loosen the screws securing the panel located at the front of the vehicle, just behind the handlebars. Once these screws are loosened, remove the panel to access the underlying filter. The old filter can be extracted, and a new one can be inserted into its housing. After replacement, cover the filter with the panel and check that the engine is running properly.

Watch the video!


by ScegliAuto

More videos