Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the KTM 1290 Adventure R, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle and remove the protective cover. Next, locate the drain hole bolts, unscrew them using a 13mm socket wrench and remove both secondary filters, which need to be cleaned. Then open the main filter cap, insert the replacement, reassemble everything and pour the new oil through the appropriate hole.

Posted on 8 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the KTM 1290 Adventure R?
How to Change the Engine Oil in the KTM 1290 Adventure R?
1290 Adventure R In this tutorial, you will learn how to change the engine oil in the KTM 1290 Adventure R, a very simple and quick operation to perform every 12 mont…
How to reset the service on the KTM 1290 Adventure?
How to reset the service on the KTM 1290 Adventure?
1290 Adventure R Resetting the service on the KTM 1290 Adventure, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we sh…
How to adjust the time on the KTM 1290 Adventure R?
How to adjust the time on the KTM 1290 Adventure R?
1290 Adventure R In this tutorial, we can see how to adjust the time on the KTM 1290 Adventure R, an extremely simple and quick operation, to be carried out for examp…

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos