Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the rear shock absorber of the Kymco Xciting S 400i, you need to open the underseat compartment and loosen all the screws that secure the internal drawer. In addition to these screws, you will also need to loosen those that secure the side fairings of the motorcycle, in order to make the operation easier. After all the bulky parts have been removed, you can then loosen the bolts that secure the shock absorbers, both in the upper and lower parts. Therefore, the new shock absorbers can be installed and all the previously removed parts can be reinstalled.

Posted on 7 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear shock absorber of the Kymco Xciting S 400i?
How do you replace the rear shock absorber of the Kymco Xciting S 400i?
Xciting S 400i In order to replace the rear shock absorber of the Kymco Xciting S 400i, you need to loosen the screws that hold it to its housing, in the part betwe…
How to Replace the Exhaust on a Kymco Xciting S 400i?
How to Replace the Exhaust on a Kymco Xciting S 400i?
Xciting S 400i To replace the exhaust on the Kymco Xciting S 400i, loosen the screws that secure the exhaust terminal to its housing, located near the rear wheel on…
How to Replace the Exhaust on a Kymco Xciting S 400i
How to Replace the Exhaust on a Kymco Xciting S 400i
Xciting S 400i You can replace the exhaust on a Kymco Xciting S 400i by loosening the screws that secure the exhaust tip to its housing, located near the rear wheel…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos