Do it yourself
Frequently asked questions about cars and motorcycles
The step-by-step instructions provided in this guide will show us the process of disassembling and replacing the rear suspensions of the Kymco People S 125 scooter. First, we put the scooter on the center stand and start unscrewing the lower suspension bolts; we remove the side plastic fairing to access the upper pin, also unscrewing it to remove the suspension, as shown in the video. At this point, we carry out the same operation for the replacement of the other suspension, fixing and reassembling everything correctly with the original bolts!

Posted on 15 September 2024 by ScegliAuto

Video tutorial

Related tutorials

People S 125 To replace the rear wheel on the Kymco People S 125, remove all screws located around the seat and inside the under-seat compartment, as indicated in…
People S 125 To replace the transmission belt on the Kymco People S 125, you need to unscrew the bolts securing the cover near the rear wheel of the scooter, on t…
People S 125 To disassemble the engine of the Kymco People S 125, you need to loosen the screws that hold it to the appropriate supports, then proceed with the re…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos