Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, learn how to remove and replace the spark plug on a Kymco People S 125. First, remove the side fairing of the scooter to access the top of the engine, then access it from the battery compartment; next, remove the spark plug cap and, using a socket spanner with an extension, unscrew the spark plug counter-clockwise. Once removed, replace it with a new one of the correct type, and screw it in by hand before tightening with the spanner: then, simply reassemble everything!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cylinder Head from a Kymco People S 125
How to Remove the Cylinder Head from a Kymco People S 125
People S 125 This guide provides instructions on how to remove and replace the engine cylinder head of the Kymco People 125 S scooter, following these simple step…
How to Replace the Engine Oil, Oil Filter, and Air Filter on the Kymco People S 125
How to Replace the Engine Oil, Oil Filter, and Air Filter on the Kymco People S 125
People S 125 These brief and simple steps will illustrate the procedure for replacing the engine oil, oil filter, and air filter on the Kymco People S 125 scooter…
How do you disassemble the engine of the Kymco People S 125?
How do you disassemble the engine of the Kymco People S 125?
People S 125 To disassemble the engine of the Kymco People S 125, you need to loosen the screws that hold it to the appropriate supports, then proceed with the re…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos