Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides instructions on how to remove and replace the engine cylinder head of the Kymco People 125 S scooter, following these simple steps. First, place your scooter on the centre stand and begin by removing the spark plug and the upper cylinder head cover; then undo the valve nuts, removing the camshaft as shown in the video. At this point, unscrew the cylinder head bolts to remove it, sliding it off the studs; you can also remove the cylinder and piston, proceeding with the valve replacement!

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear suspensions of the Kymco People S 125
How to replace the rear suspensions of the Kymco People S 125
People S 125 The step-by-step instructions provided in this guide will show us the process of disassembling and replacing the rear suspensions of the Kymco People…
How to Dismantle the Belt, Variator, and Rollers on Kymco People S 125
How to Dismantle the Belt, Variator, and Rollers on Kymco People S 125
People S 125 In this video tutorial, you will learn how to dismantle and replace the drive belt, rollers, and variator on a Kymco People S 125 scooter. First, pos…
How to Remove the Front Shield on the Kymco People 125 S
How to Remove the Front Shield on the Kymco People 125 S
People S 125 In this video tutorial, discover the main steps to remove the shield and front fairing on the Kymco People S 125 scooter. First, undo the fixing scre…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos