Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Kymco Like 125?

Model: Kymco Like 125
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Kymco Like 125, you need to loosen the screws that secure it to its housing, located near the rear wheel on the right side of the scooter. Once the support screws are loosened, you can widen the ring that connects the exhaust tip to its housing so that the old exhaust can be completely removed.

After removal, you can insert the new one, ensuring it is secured in place and connected to the manifold, checking that everything is functioning correctly.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to replace the rear wheel of the Kymco Like 125
How to replace the rear wheel of the Kymco Like 125
Like 125 In this new guide dedicated to all of you who own a Kymco Like 125, we will explain how to correctly replace the rear wheel. First of all, make sure …
How to Remove the Rear Wheel on Kymco Like 125
How to Remove the Rear Wheel on Kymco Like 125
Like 125 In this video, you will see how to remove the rear wheel on a Kymco Like 125 scooter in simple and quick steps. First, position the scooter on the ce…
How do you replace the engine oil of the Kymco Like 125?
How do you replace the engine oil of the Kymco Like 125?
Like 125 The oil change of the Kymco Like 125 can be performed by removing the drain plug of the oil pan, located in the central lower part of the motorcycle:…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos