Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the engine oil of the Kymco Like 125?

Model: Kymco Like 125
Part: Engine oil

Video tutorial

The oil change of the Kymco Like 125 can be performed by removing the drain plug of the oil pan, located in the central lower part of the motorcycle: once the plug is unscrewed, the used oil can be collected in a container placed correctly. Then, the oil filter can be removed from its seat in order to insert a new one; after the replacement, topping up will be necessary.

The necessary amount of oil should be poured into the tank to fill it, through the vent on the right side.


Posted on 5 July 2025 by ScegliAuto


Related tutorials

Like 125 To perform the oil change on the Kymco Like 125, you need to unscrew the drain plug located in the central lower part of the vehicle. Once removed, y…
Like 125 The engine oil in the lubrication system of the Kymco Like 125 can be replaced by removing the drain plug of the oil pan, located in the central lowe…
Like 125 Today's instructions will illustrate the process of replacing the motor oil, performing the routine maintenance check on the Kymco Like 125 scooter. …

How to Replace the Fork on a Peugeot Kisbee?

To replace the fork on a Peugeot Kisbee, loosen the bolts securing the front wheel to its housing: you will need to unscrew the bolts that hold the corresponding nut to remove the central axle of the wheel. Next, disconnect the brake caliper from the disc and proceed by unscrewing the bolts of the fairings that surround the fork: at this point, you can loosen the bolts that secure the fork to the steering, allowing you to insert the new one. This can then be secured to the steering, covered with the fairing, and the front wheel installed.

Watch the video!


by ScegliAuto

More videos