Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil of the Kymco Like 125

Model: Kymco Like 125
Part: Engine oil

Video tutorial

Today's instructions will illustrate the process of replacing the motor oil, performing the routine maintenance check on the Kymco Like 125 scooter. First, we put the scooter on the center stand and start by unscrewing the oil drain bolt located under the engine, letting it drain into a container for about ten minutes; then we also unscrew the fill cap, allowing the oil to flow out more quickly.

At this point, we top up with the new motor oil, of the correct type and specifications indicated in the owner's manual, then start the engine and top up if necessary.


Posted on 4 July 2025 by ScegliAuto


Related tutorials

Guide to Replacing the Engine Oil on the Kymco Like 125
Guide to Replacing the Engine Oil on the Kymco Like 125
Like 125 In this brief guide, you will find instructions for replacing the engine oil during the regular maintenance service on the Kymco Like 125. First, pos…
How to Service the Kymco Like 125
How to Service the Kymco Like 125
Like 125 Today's guide will show you the useful instructions for servicing the Kymco Like 125 scooter, including changing the engine oil, gearbox oil, and air…
How to Change the Oil in the Kymco Like 125 Gearbox
How to Change the Oil in the Kymco Like 125 Gearbox
Like 125 In this guide, we will provide the instructions to change the transmission oil of the Kymco Like 125 scooter. First, place the scooter on the centre …

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos