Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the switches on the handlebars of the Kymco Agility 125 by loosening the screws that secure the front shield of the motorcycle fairing: once the screws of this panel have been loosened, it will be possible to remove the component. At this point, it will be necessary to unscrew the screws that secure the switches from the top so that it will then be possible to disconnect the connectors connected to it; in this way, the new replacement parts can now be positioned and everything covered with the panel to verify that everything works correctly.

Posted on 2 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the Kymco Agility 125?
How do you replace the front brake pads of the Kymco Agility 125?
Agility 125 In order to replace the front brake pads of the Kymco Agility 125, you will need to loosen the screws that secure the brake caliper to the correspond…
How to Replace the Diaphragm of the Kymco Agility 125 Carburettor
How to Replace the Diaphragm of the Kymco Agility 125 Carburettor
Agility 125 Today, see the instructions that will allow you to remove and replace the diaphragm of the carburettor on the Kymco Agility 125 scooter. First, place…
In the Kymco Agility 125, where are the fuses located?
In the Kymco Agility 125, where are the fuses located?
Agility 125 The Kymco Agility 125 scooter is very similar to the majority of scooters on the market, as it has a battery and fuse arrangement under the footboard…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos