Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear headlight bulb of the Kymco Super 8 125?

Model: Kymco Super 8 125
Part: Tail light bulb

Video tutorial

In order to replace the rear headlight bulb of the Kymco Super 8 125, you need to open the underseat compartment, so that you can locate the screws at the back: once these screws have been loosened, you can proceed by removing the panel at the top and disconnecting the connectors underneath.

The headlight can then be detached and the bulb inside can be removed; at this point, you can insert the new bulb, repositioning the headlight in its housing and securing it properly.


Posted on 9 July 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on a Kymco Super 8 125
How to Replace the Rear Light Bulb on a Kymco Super 8 125
Super 8 125 Today, discover the guide that will allow you to dismantle and replace the rear light bulb of the Kymco Super 8 125 scooter. First, place your scoote…
How do you replace the rear shock absorber of the Kymco Super 8 125?
How do you replace the rear shock absorber of the Kymco Super 8 125?
Super 8 125 The rear shock absorber installed on the Kymco Super 8 125 can be replaced by loosening the screws that secure the component to its housing: this com…
How to Replace the Exhaust on a Kymco Super 8 125?
How to Replace the Exhaust on a Kymco Super 8 125?
Super 8 125 To replace the exhaust on a Kymco Super 8 125, loosen the screws that secure the exhaust end can to its mounting near the rear wheel on the right sid…

How to Change the Engine Oil in a Honda Dio Scooter?

In this tutorial, see how to change the engine oil in a Honda Dio scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough to work safely, then position a container underneath the scooter, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out, then tighten the bolt after applying a new washer and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos