Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Kymco KRV 200 Scooter

Model: Kymco Krv 200
Part: Service warning light

Video tutorial

In this tutorial, you will see how to reset the service on a Kymco KRV 200 scooter, a very simple and quick operation to perform only after completing all scheduled maintenance tasks. First, insert the key, then turn on the instrument panel and, using the "SET" button, navigate to the odometer related to the service.

Next, press and hold both the "MODE" button and the "SET" button for the necessary time to ensure the interval resets correctly, restart the panel and check that the procedure has been successful.


Posted on 14 February 2026 by ScegliAuto


Related tutorials

How to set the time on the display of the Kymco KRV 200 dashboard
How to set the time on the display of the Kymco KRV 200 dashboard
Krv 200 Today's video tutorial will show us how to adjust the time on the display of the instrument panel of the Kymco KRV 200 scooter. First, we put the sco…
How do you set the clock on the Kymco KRV 200?
How do you set the clock on the Kymco KRV 200?
Krv 200 To set the clock of the Kymco KRV 200, you need to insert the ignition key into the ignition switch: once the dashboard is turned on, you can hold do…
How to Replace the Air Filter on the Kymco KRV 200
How to Replace the Air Filter on the Kymco KRV 200
Krv 200 To replace the air filter on the Kymco KRV 200, lift the seat by unlocking the latch to access the under-seat compartment. At the front, you will fin…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos