Do it yourself
Frequently asked questions about cars and motorcycles
Today, we will go through the instructions to change the engine oil and perform the routine maintenance service on the Kymco Agility 50 scooter. First, place the scooter on its stand and start by unscrewing the oil drain bolt found on the sump, allowing it to drain into a container for about ten minutes; then, unscrew the filler screw and top up with new engine oil, as shown in the video. At this point, start the engine and subsequently check the engine oil level, topping up further if necessary.

Posted on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…
Agility 50 In this video tutorial, you will learn how to change the engine oil and gear oil on the Kymco Agility 50 scooter in simple and quick steps. First, po…
Agility 50 In this tutorial, we will see how to replace the engine oil in the Kymco Agility 50 scooter, a very simple and quick operation. First of all, let's m…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos