Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Kymco Agility 50 scooter?

Model: Kymco Agility 50
Part: Engine oil

Video tutorial

In this tutorial, we will see how to replace the engine oil in the Kymco Agility 50 scooter, a very simple and quick operation. First of all, let's make sure that the engine is cool enough to operate safely.

Then, we open the cap of the fill hole, position a container underneath the scooter, and, using a socket wrench, unscrew the cap of the drain hole. Next, we remove the filter, clean it of any dirt residue, and reassemble everything once the oil contained in the system has drained out. At this point, all that's left to do is to add the required amount of oil through the designated upper hole.


Posted on 16 December 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Kymco Agility 50
How to Change the Engine Oil on a Kymco Agility 50
Agility 50 Today, we will go through the instructions to change the engine oil and perform the routine maintenance service on the Kymco Agility 50 scooter. Firs…
How to reset the service light on the Kymco Agility 50 scooter?
How to reset the service light on the Kymco Agility 50 scooter?
Agility 50 In this tutorial we can see how to reset the service in the Kymco Agility 50 scooter, an extremely simple and quick operation, to be carried out only…
Replace Engine Oil and Gear Oil on the Kymco Agility 50
Replace Engine Oil and Gear Oil on the Kymco Agility 50
Agility 50 In this video tutorial, you will learn how to change the engine oil and gear oil on the Kymco Agility 50 scooter in simple and quick steps. First, po…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos