Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial we can see how to reset the service in the Kymco Agility 50 scooter, an extremely simple and quick operation, to be carried out only once all scheduled maintenance work has been completed. First of all, insert the key, then turn on the instrument panel and, using the left button on the dashboard, reach the mileage related to the service. Then press and hold both the left and right buttons, keep them in position until the interval stops flashing, and complete the procedure by restarting the instrument panel.

Posted on 10 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Agility 50 In this brief and simple guide, you will find out where to locate the fuses and, if necessary, how to replace them on the Kymco Agility 125 scooter. …
Agility 50 This guide provides the main instructions for removing and replacing the drive belt on the Kymco Agility 50 scooter. First, place the scooter on its …
Agility 50 This video shows the procedure for disassembling and replacing the variator and rollers, as well as the drive belt, on the Kymco Agility 50 scooter. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos