Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Agility 50

Kymco Agility 50 - Video guides

Kymco Agility 50
How to change the battery of the Kymco Agility 50
The battery of the Kymco is located under the seat, so lift it and remove the battery protection panel by unscrewing the screws on the floor. The battery may …Read all…
Posted on 11 September 2026 by ScegliAuto
Kymco Agility 50
How to Replace the Fuse on a Kymco Agility Scooter
To replace a fuse on a Kymco Agility 50 scooter, remove the cover of the fuse box located in the footwell. After this simple operation using a cross-head …Read all…
Posted on 14 August 2026 by ScegliAuto
Kymco Agility 50
How to replace the transmission on the Kymco Agility 50?
To replace the transmission on the Kymco Agility 50, loosen the screws that secure the corresponding cover located near the rear wheel on the left side: once …Read all…
Posted on 14 August 2026 by ScegliAuto
Kymco Agility 50
How to replace the headlight bulb on a Kymco Agility 50?
You can replace the headlight bulb on a Kymco Agility 50 by loosening the screws that secure the front shield of the scooter: these screws are located on the …Read all…
Posted on 7 August 2026 by ScegliAuto
Kymco Agility 50
How to Change the Engine Oil on a Kymco Agility 50
Today, we will go through the instructions to change the engine oil and perform the routine maintenance service on the Kymco Agility 50 scooter. First, place …Read all…
Posted on 6 June 2026 by ScegliAuto
Kymco Agility 50
How to Replace the Variator on Kymco Agility 50?
To replace the variator on the Kymco Agility 50, loosen the screws securing the transmission cover located on the left side of the scooter, near the rear …Read all…
Posted on 31 March 2026 by ScegliAuto
Kymco Agility 50
How to Replace the Air Filter of the Kymco Agility 50?
To replace the air filter of the Kymco Agility 50, loosen the screws securing the air filter box: this is located near the rear wheel on the left side of the …Read all…
Posted on 19 February 2026 by ScegliAuto
Kymco Agility 50
How to disassemble the belt and variator of the Kymco Agility 50.
In this guide, we will see the instructions that will allow us to disassemble the belt and the variator of the Kymco Agility 50 scooter. First, we put the …Read all…
Posted on 29 December 2025 by ScegliAuto
Kymco Agility 50
How to replace the engine oil in the Kymco Agility 50 scooter?
In this tutorial, we will see how to replace the engine oil in the Kymco Agility 50 scooter, a very simple and quick operation. First of all, let's make sure …Read all…
Posted on 16 December 2025 by ScegliAuto
Kymco Agility 50
How to reset the service light on the Kymco Agility 50 scooter?
In this tutorial we can see how to reset the service in the Kymco Agility 50 scooter, an extremely simple and quick operation, to be carried out only once all …Read all…
Posted on 10 November 2025 by ScegliAuto
Kymco Agility 50
How do you replace the air filter of the Kymco Agility 50?
It will be possible to replace the air filter of the Kymco Agility 50 by loosening the screws that secure the panel covering the filter box, located on the …Read all…
Posted on 1 November 2025 by ScegliAuto
Kymco Agility 50
How to replace the battery of the Kymco Agility 50
To replace the battery of our Kymco Agility 50 scooter, we need to lift the seat and remove the battery compartment cover. After removing the compartment, …Read all…
Posted on 18 September 2025 by ScegliAuto
Kymco Agility 50
How to disassemble the front wheel of the Kymco Agility
Today we will explain how to remove the front wheel of the Kymco Agility 50 scooter. To perform this operation, we must first lift the scooter and immediately …Read all…
Posted on 5 September 2025 by ScegliAuto
Kymco Agility 50
How to replace the battery of the Kymco Agility
Today we will explain how to replace the battery of your Kymco Agility on your own. The battery on these types of scooters is located under the footrest …Read all…
Posted on 3 July 2025 by ScegliAuto
Kymco Agility 50
How to replace the mirror of a Kymco Agility 50?
To disassemble the mirror of a Kymco Agility 50, start by locating the attachment point of the mirror on the handlebar. Usually, the mirror is fixed with a nut …Read all…
Posted on 9 April 2025 by ScegliAuto
Kymco Agility 50
How to change the oil of the Kymco Agility 50
In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the new oil …Read all…
Posted on 23 February 2025 by ScegliAuto
Kymco Agility 50
How do you replace the coils of the Kymco Agility 50?
To replace the coils of the Kymco Agility 50, you will need to open the underseat compartment: in this way it will be possible to locate the corresponding …Read all…
Posted on 13 February 2025 by ScegliAuto
Kymco Agility 50
How to change the headlight bulb of the Kymco Agility 50
Let's see the step-by-step instructions that will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the Kymco …Read all…
Posted on 27 December 2024 by ScegliAuto
Kymco Agility 50
Guide to Replacing the Drive Belt on a Kymco Agility 50
This guide provides the main instructions for removing and replacing the drive belt on the Kymco Agility 50 scooter. First, place the scooter on its central …Read all…
Posted on 18 September 2026 by ScegliAuto
Kymco Agility 50
How to Replace the Variator on the Kymco Agility 50?
To replace the variator on the Kymco Agility 50, loosen the screws securing the transmission cover located near the rear wheel on the left side of the scooter. …Read all…
Posted on 13 September 2026 by ScegliAuto

See also:

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos