Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the air filter of the Kymco Agility 50?

Model: Kymco Agility 50
Part: Air filter

Video tutorial

It will be possible to replace the air filter of the Kymco Agility 50 by loosening the screws that secure the panel covering the filter box, located on the left side next to the rear wheel: once the box is opened, it will be possible to loosen the screws that secure the filter to its seat in order to remove it and replace it with a new one. Once the old filter has been removed, the new one can be inserted to secure it and then cover everything with the panel: in this way, it will be possible to verify that everything works correctly.


Posted on 1 November 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Kymco Agility 50?
How to Replace the Air Filter of the Kymco Agility 50?
Agility 50 To replace the air filter of the Kymco Agility 50, loosen the screws securing the air filter box: this is located near the rear wheel on the left sid…
How to change the oil of the Kymco Agility 50
How to change the oil of the Kymco Agility 50
Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…
How do you replace the coils of the Kymco Agility 50?
How do you replace the coils of the Kymco Agility 50?
Agility 50 To replace the coils of the Kymco Agility 50, you will need to open the underseat compartment: in this way it will be possible to locate the correspo…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos