Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator on the Kymco Agility 50?

Model: Kymco Agility 50
Part:

This video is currently unavailable

To replace the variator on the Kymco Agility 50, loosen the screws securing the transmission cover located near the rear wheel on the left side of the scooter. Once the cover is removed, locate the variator on the left: you will need to loosen the central nut that secures it in place, also removing the drive belt around it. After removing the old variator, insert the new one, securing it properly with the nut and repositioning the belt around it.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to Replace the Variator on Kymco Agility 50?
How to Replace the Variator on Kymco Agility 50?
Agility 50 To replace the variator on the Kymco Agility 50, loosen the screws securing the transmission cover located on the left side of the scooter, near the …
How to Replace the Rollers of the Kymco Agility 50 Variator
How to Replace the Rollers of the Kymco Agility 50 Variator
Agility 50 In this video, see how to dismantle and replace the rollers of the variator on the Kymco Agility 50cc scooter in simple steps. First, place the scoot…
How to disassemble the belt and variator of the Kymco Agility 50.
How to disassemble the belt and variator of the Kymco Agility 50.
Agility 50 In this guide, we will see the instructions that will allow us to disassemble the belt and the variator of the Kymco Agility 50 scooter. First, we pu…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos