Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can replace the headlight bulb on a Kymco Agility 50 by loosening the screws that secure the front shield of the scooter: these screws are located on the inside of the shield and within the corresponding wheel arch. This allows you to detach the shield and disconnect the internal connector of the headlight: the old bulb can then be removed, and the new one can be connected to the socket. Insert the new bulb into the headlight, securing it in place, and reinstall the corresponding front shield.

Posted on 7 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on the Kymco Agility 50?
How to replace the headlight bulb on the Kymco Agility 50?
Agility 50 To replace the headlight bulb on the Kymco Agility, you need to loosen the five screws that secure the front fairing of the bike, around which the he…
How to change the headlight bulb of the Kymco Agility 50
Agility 50 Let's see the step-by-step instructions that will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the K…
How to change the oil of the Kymco Agility 50
How to change the oil of the Kymco Agility 50
Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos