Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Kymco Agility

Model: Kymco Agility 50
Part: Battery

Video tutorial

Today we will explain how to replace the battery of your Kymco Agility on your own. The battery on these types of scooters is located under the footrest compartment. We remove the plastic cover of the footrest to access the battery compartment.

Disconnect the negative terminal connector and immediately after the positive terminal connector. Unscrew the locking screws of the battery to remove it from the compartment.

Insert the new battery into the compartment and tighten the side screws. Connect the positive terminal connector and immediately after the negative terminal connector.

Close the plastic cover of the footrest and screw in the screw.


Posted on 2 July 2025 by ScegliAuto


Related tutorials

How to change the oil of the Kymco Agility 50
How to change the oil of the Kymco Agility 50
Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…
How to replace the battery of the Kymco Agility 50
How to replace the battery of the Kymco Agility 50
Agility 50 To replace the battery of our Kymco Agility 50 scooter, we need to lift the seat and remove the battery compartment cover. After removing the compart…
How to Replace the Fuses on a Kymco Agility 50
How to Replace the Fuses on a Kymco Agility 50
Agility 50 In this brief and simple guide, you will find out where to locate the fuses and, if necessary, how to replace them on the Kymco Agility 125 scooter. …

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos