Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuses on a Kymco Agility 50

Model: Kymco Agility 50
Part: Fuse box

Video tutorial

In this brief and simple guide, you will find out where to locate the fuses and, if necessary, how to replace them on the Kymco Agility 125 scooter. First, place your scooter on the centre stand and begin removing the plastic cover found on the footboard; underneath, you will find the battery compartment and the main fuses of your scooter, as shown in the video.

At this point, remove and replace any blown fuse with a new one of the correct type and the same amperage; you can use the diagram provided in the user and maintenance manual!


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to change the oil of the Kymco Agility 50
How to change the oil of the Kymco Agility 50
Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…
How do you replace the coils of the Kymco Agility 50?
How do you replace the coils of the Kymco Agility 50?
Agility 50 To replace the coils of the Kymco Agility 50, you will need to open the underseat compartment: in this way it will be possible to locate the correspo…
How to Replace the Belt on the Kymco Agility 50
How to Replace the Belt on the Kymco Agility 50
Agility 50 To replace the belt on the Kymco Agility 50, loosen the bolts securing the cover of the transmission casing: this is located on the left side of the …

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos