Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt on the Kymco Agility 50

Model: Kymco Agility 50
Part:

Video tutorial

To replace the belt on the Kymco Agility 50, loosen the bolts securing the cover of the transmission casing: this is located on the left side of the bike, near the rear wheel. After removing the cover, access the underlying components by unscrewing the central nut that secures the variator and the clutch discs; by removing both components, the belt can be slid out of its housing, replaced with a new one, and all previously removed components reassembled.


Updated on 27 June 2026 by ScegliAuto


Related tutorials

Agility 50 This guide provides the main instructions for removing and replacing the drive belt on the Kymco Agility 50 scooter. First, place the scooter on its …
Agility 50 This video shows the procedure for disassembling and replacing the variator and rollers, as well as the drive belt, on the Kymco Agility 50 scooter. …
Agility 50 To replace the variator on the Kymco Agility 50, loosen the screws securing the transmission cover located on the left side of the scooter, near the …

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos