Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Variator on a Kymco Agility 50

Model: Kymco Agility 50
Part:

Video tutorial

This video shows the procedure for disassembling and replacing the variator and rollers, as well as the drive belt, on the Kymco Agility 50 scooter. First, place the scooter on its central stand and start by unscrewing the screws on the transmission cover; once removed, unscrew the fan nut and the central nut of the bell, as shown in the video.

At this point, remove the belt and then the variator, replacing it with the new one; simply reassemble everything, following the video tutorial to the end!


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Variator on Kymco Agility 50?
How to Replace the Variator on Kymco Agility 50?
Agility 50 To replace the variator on the Kymco Agility 50, loosen the screws securing the transmission cover located on the left side of the scooter, near the …
How to Replace the Variator on the Kymco Agility 50?
Agility 50 To replace the variator on the Kymco Agility 50, loosen the screws securing the transmission cover located near the rear wheel on the left side of th…
How to Replace the Rollers of the Kymco Agility 50 Variator
How to Replace the Rollers of the Kymco Agility 50 Variator
Agility 50 In this video, see how to dismantle and replace the rollers of the variator on the Kymco Agility 50cc scooter in simple steps. First, place the scoot…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos