Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Agility 50
Part: Battery

To replace the battery of our Kymco Agility 50 scooter, we need to lift the seat and remove the battery compartment cover. After removing the compartment, disconnect the negative and positive pole connectors. Remove the battery from its slot and unscrew it from the bracket. Insert the new battery into the compartment and connect the positive pole first, followed by the negative pole. Screw the bracket screw and close the cover. Sit on the closed seat to test the functioning of our scooter. In case of malfunction, check the condition of the connectors and replace the fuse.

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the oil of the Kymco Agility 50
How to change the oil of the Kymco Agility 50
Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…
How to Replace the Fuses on a Kymco Agility 50
How to Replace the Fuses on a Kymco Agility 50
Agility 50 In this brief and simple guide, you will find out where to locate the fuses and, if necessary, how to replace them on the Kymco Agility 125 scooter. …
How do you replace the coils of the Kymco Agility 50?
How do you replace the coils of the Kymco Agility 50?
Agility 50 To replace the coils of the Kymco Agility 50, you will need to open the underseat compartment: in this way it will be possible to locate the correspo…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos