Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Kymco Agility 50

Model: Kymco Agility 50
Part: Battery

Video tutorial

The battery of the Kymco is located under the seat, so lift it and remove the battery protection panel by unscrewing the screws on the floor. The battery may be secured with a bolt or strap: disconnect the negative terminal first and then the positive.

This reduces the risk of creating a short circuit if the key accidentally touches the frame. Install the new battery in reverse order, connecting the positive terminal first and then the negative, for the same reason.

Secure it with the bolt or strap, reattach the protection cover, and screw the screws back in.


Posted on 11 September 2026 by ScegliAuto


Related tutorials

How to change the oil of the Kymco Agility 50
How to change the oil of the Kymco Agility 50
Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…
How to replace the battery of the Kymco Agility 50
How to replace the battery of the Kymco Agility 50
Agility 50 To replace the battery of our Kymco Agility 50 scooter, we need to lift the seat and remove the battery compartment cover. After removing the compart…
How to change the headlight bulb of the Kymco Agility 50
Agility 50 Let's see the step-by-step instructions that will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the K…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos