Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the mirror of a Kymco Agility 50?

Model: Kymco Agility 50
Part:

Video tutorial

To disassemble the mirror of a Kymco Agility 50, start by locating the attachment point of the mirror on the handlebar. Usually, the mirror is fixed with a nut or a screw.

Use a wrench or a suitable screwdriver to loosen the nut or screw holding the mirror in place. Once the fastening is loosened, unscrew the mirror by turning it counterclockwise.

Continue unscrewing until the mirror is completely detached from the handlebar. If the mirror is stuck or difficult to remove, apply some spray lubricant on the base to facilitate removal.

Once the mirror is removed, clean the mounting area to remove any residue or dirt. You can now replace the mirror with a new one following the reverse process, securely screwing it onto the handlebar and tightening the nut or screw to ensure it is properly fixed.


Posted on 8 April 2025 by ScegliAuto


Related tutorials

How to Replace the Rear View Mirror on the Kymco Agility 50
How to Replace the Rear View Mirror on the Kymco Agility 50
Agility 50 To replace the rear view mirror on the Kymco Agility, loosen the nut located at the base of the mirror support. Once this nut is loosened, you can ro…
How to change the oil of the Kymco Agility 50
How to change the oil of the Kymco Agility 50
Agility 50 In the following mini guide, we will discover together how to correctly change the oil of your Kymco Agility 50. First of all, make sure you have the…
How do you replace the coils of the Kymco Agility 50?
How do you replace the coils of the Kymco Agility 50?
Agility 50 To replace the coils of the Kymco Agility 50, you will need to open the underseat compartment: in this way it will be possible to locate the correspo…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos