Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuse on a Kymco Agility Scooter

Model: Kymco Agility 50
Part: Fuse box

Video tutorial

To replace a fuse on a Kymco Agility 50 scooter, remove the cover of the fuse box located in the footwell. After this simple operation using a cross-head screwdriver, proceed to replace the damaged fuse, using needle-nose pliers to easily extract the fuse and insert the new one. It is very important that the inserted fuse has the same amperage as the one previously removed to avoid damage to the scooter's control unit.

If problems persist, it may be necessary to visit a workshop for a diagnostic check.


Posted on 14 August 2026 by ScegliAuto


Related tutorials

How to Replace the Fuses on a Kymco Agility 50
How to Replace the Fuses on a Kymco Agility 50
Agility 50 In this brief and simple guide, you will find out where to locate the fuses and, if necessary, how to replace them on the Kymco Agility 125 scooter. …
How to replace the battery of the Kymco Agility 50
How to replace the battery of the Kymco Agility 50
Agility 50 To replace the battery of our Kymco Agility 50 scooter, we need to lift the seat and remove the battery compartment cover. After removing the compart…
Guide to Replacing the Drive Belt on a Kymco Agility 50
Guide to Replacing the Drive Belt on a Kymco Agility 50
Agility 50 This guide provides the main instructions for removing and replacing the drive belt on the Kymco Agility 50 scooter. First, place the scooter on its …

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos