Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the rear brake pads on a Kymco Agility 125 scooter, a very simple and quick operation. First, separate the caliper from the fork by unscrewing the relevant bolts with a 12mm socket, then detach the hoses from the bracket and unscrew the small cap on the lower pin. Next, unscrew the pin itself, remove the old pads, and compress the piston using a clamp. Finally, clean any dirt residue, position the replacement pads, and reassemble everything by following the reverse procedure.

Posted on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front brake pads of the Kymco Agility 125?
How do you replace the front brake pads of the Kymco Agility 125?
Agility 125 In order to replace the front brake pads of the Kymco Agility 125, you will need to loosen the screws that secure the brake caliper to the correspond…
In the Kymco Agility 125, where are the fuses located?
In the Kymco Agility 125, where are the fuses located?
Agility 125 The Kymco Agility 125 scooter is very similar to the majority of scooters on the market, as it has a battery and fuse arrangement under the footboard…
How to Change the Engine Oil in the Kymco Agility 125 Scooter
How to Change the Engine Oil in the Kymco Agility 125 Scooter
Agility 125 In this tutorial, you will see how to change the engine oil in the Kymco Agility 125 scooter, an extremely simple and quick operation. First, ensure …

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos