Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
You can change the oil of the Kymco GP125 gearbox by loosening the drain plug of the transmission casing, which is located at the rear of the bike near the wheel: once the plug is removed, allow all the used oil to drain into a container. Then, proceed to top up with the necessary amount of oil from the same vent: you will need to use a pump to insert the required amount of oil into the casing.

Posted on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Bleed the Brake System of the Kymco GP125
How to Bleed the Brake System of the Kymco GP125
Gp125 This guide shows how to bleed the brake fluid system of the Kymco GP125. After securing the vehicle and protecting the upper fairing with rags, remov…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos