Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on a Kymco Downtown 350

Model: Kymco Downtown 350
Part: Battery

Video tutorial

Open the seat using the appropriate key and access the compartment underneath. Unscrew the two rear side screws of the compartment: these secure the protective cover of the battery housing.

Remove this cover by pulling it upwards. Once done, you can unscrew the other two small screws that are now exposed.

Remove the second cover, and voilà! Here is the battery. Simply grab it from the top and pull it out of its housing, unscrewing the two terminals in the process: always disconnect the negative terminal first.

Proceed in reverse to install the new battery.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Replacing the Battery on the Kymco Downtown 350
Replacing the Battery on the Kymco Downtown 350
Downtown 350 Here are the instructions to remove and replace the battery of the Kymco Downtown 350 scooter in simple and quick steps. First, place the scooter on …
How to Service the Kymco Downtown 350
How to Service the Kymco Downtown 350
Downtown 350 Today, let's look at the instructions that will allow you to perform a complete service on the Kymco Downtown 350 scooter. First, place the scooter o…
How to set the time on a Kymco Downtown 350 scooter?
How to set the time on a Kymco Downtown 350 scooter?
Downtown 350 In this tutorial, you will see how to set the time on a Kymco Downtown 350 scooter, a very simple and quick operation to perform, for example, after …

How to Replace the Spark Plug on a Honda Dio Scooter?

In this tutorial, see how to replace the spark plug on a Honda Dio scooter, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then open the seat and, by unscrewing all the indicated screws, remove the entire internal plastic frame. Next, disconnect the spark plug power connector, grasp the spark plug with the appropriate socket spanner, and unscrew it. At this point, simply insert the replacement, tighten it gently, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos