Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Lift the scooter seat and unscrew the nuts holding the support rod, then remove it. Unscrew the two nuts securing the seat to the scooter and remove the seat. Remove the clip located under the right side of the panel. Take out the black box located under the seat that protects the connector, then disconnect it. Unscrew the four screws securing the compartment under the seat and fully extract it. Disconnect the visible red connector, unscrew the four bolts securing the battery, and remove it. Insert the new battery and proceed in reverse order.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery on a Kymco Downtown 350
Replacing the Battery on a Kymco Downtown 350
Downtown 350 Open the seat using the appropriate key and access the compartment underneath. Unscrew the two rear side screws of the compartment: these secure the …
How to Reset the Service Light on the Kymco Downtown 350
How to Reset the Service Light on the Kymco Downtown 350
Downtown 350 This video shows the procedure to reset the maintenance light on the Kymco Downtown 350. The process is simple and takes little time. To reset it, fi…
Replacing the Battery on the Kymco Downtown 350
Replacing the Battery on the Kymco Downtown 350
Downtown 350 Here are the instructions to remove and replace the battery of the Kymco Downtown 350 scooter in simple and quick steps. First, place the scooter on …

How to Access the Battery in the Benelli 180S?

In this tutorial, you will see how to access the battery in the Benelli 180S, a very simple operation useful if you need to recharge or replace it. First, ensure that the key is not inserted, then remove the passenger seat and, using the provided keys, unscrew the two bolts securing the rider's seat. Once removed, unscrew the screws of the upper plastic bracket, disconnect both terminals starting with the negative, and extract the battery from its housing. To install a replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos