Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco People S 125
Part:

In this video tutorial, you will learn how to dismantle and replace the drive belt, rollers, and variator on a Kymco People S 125 scooter. First, position the scooter on the centre stand and remove the air filter box along with the filter by unscrewing the fixing screws with a socket wrench; then unscrew the screws of the clutch cover, removing it as shown in the video. At this point, unscrew the nut of the fan to remove it; then remove the belt and the variator, replacing the rollers found inside: follow the video until the end!

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

People S 125 To replace the transmission belt on the Kymco People S 125, you need to unscrew the bolts securing the cover near the rear wheel of the scooter, on t…
People S 125 The step-by-step instructions provided in this guide will show us the process of disassembling and replacing the rear suspensions of the Kymco People…
People S 125 To disassemble the engine of the Kymco People S 125, you need to loosen the screws that hold it to the appropriate supports, then proceed with the re…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos